Skip to main content
All CollectionsProgram/ Specific Programs
NYSERDA & PSEG Custom Measures
NYSERDA & PSEG Custom Measures
Updated over a year ago

Custom measure codes have been added to the NYSERDA & PSEG programs.

You must select either the NYSERDA or PSEG program when creating a job for the custom measures to show up.

On the Refine screen choose to add a custom recommendation.


When adding a custom recommendation to the job, you must select the approved program measure code to go with it. This will add the required information to the xml report.

For a program measure code, open the dropdown and select the measure - and then also fill in the recommendation title. The program measure does not fill in the title for you - which gives you some flexibility. Also indicate the cost of the custom measure. As with any custom recommendation, Savings and SIR are not calculated.


The program measure codes have special coding for the NYSERDA HPXML file which will show on your project.

Also remember that you can sort the recommendations / custom measures to the order that your prefer for the solutions page.


NYSERDA & PSEG approved measure codes

Health & Safety

  • Asbestos abatement: Asbestos abatement

  • CAZ safety work: Measures to provide sufficient combustion air and prevent CAZ depressurization, spillage, or inadequate draft

  • CO mitigation work: Repairs/upgrades to heating and/or DHW systems to correct spillage, inadequate draft, CO failures

  • Dryer vent repair: Dryer vent repair

  • Electrical Service: Electrical service upgrade necessary when installing a new heating/cooling unit

  • Gas leak repair: Gas leak repair

  • Home Repairs: Repairs to the home due to water damage, molds and mildew, ice dams or other symptoms of poor building performance, as long as the cause(s) of building performance-related damage are addressed

  • Knob and tube upgrade: Upgrade of knob and tube wiring in order to install insulation

  • Lead abatement work: Lead abatement work

  • Oil Tank removal: Cost of removing an oil tank when done in connection with a heating system replacement

  • Oil Tank replacement: Cost of replacing a faulty oil tank when done in connection with a heating system replacement

  • Radon abatement work: Radon abatement work

Qualified accessories

  • Air Cleaners: Air cleaners

  • Attic Access: Attic pull-down stairs

  • Attic venting: Attic soffit, gable, or ridge vents

  • Chimney liners and caps: Chimney liners and caps

  • CO and smoke detectors: CO and smoke detectors

  • DHW pressure relief valves: DHW pressure relief valves

  • Fuel conversion items: Fuel conversion accessory items

  • Furnace humidifier: Furnace humidifier

  • Gas oven replacement: Gas oven replacement

  • Germicidal UV lights or HEPA filters: Germicidal UV lights or HEPA filters

  • HVAC accessories: AC coil when not installed with condenser

  • Insulation accessories: Attic storage areas/mechanical areas

  • Oil burner replacement: Oil burner replacement

  • Thermal barriers for spray foam: Thermal barriers for spray foam

  • Thermal drywall: Drywall as thermal barrier for spray foam or air sealing

Improvements

  • Moisture barrier installed in crawlspace

  • Water heater pipe insulation

  • Water heater tank insulation

Did this answer your question?